Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80
Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80 Davies Craig Electric Water Pump EWP80
Davies Craig Electric Water Pump EWP80
EWP ® 80 Kit Remote Electric Water Pump (PART #8005) The EWP ® 80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your...

Shipping costs

€ 11,52

€ 201,99
Price per unit

Stock : 1

Quantity: 
Order
 

EWP®80 Kit Remote Electric Water Pump (PART #8005)

The EWP®80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres. The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.


The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque and used extensively in Intercooler applications. 

CONTENTS
PART DESCRPTION UNITS

EWP®80 - Nylon 12V Assembly

1
Nylon Flange Adapter: 35mm 90° Elbow 1
Nylon Flange Adapter: 35mm Straight 1
EWP ADAPTOR O-RING 2

Adaptor - Rubber Sleeve - 3mm {1/8"}

(Increase hose fitting size to 38mm)

*For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *Sold Seperately

2
HOSE CLAMP 2
EWP® BASIC PUMP LOOM 1
RED - Wire Joiner  1
RED - 6mm Ring Terminal 1
RELAY - 12V 40 Amp 5 Pin W/- Resistor Protection 1
SCREW - SELF TAP 8X3/8 BZ 1
5x12 Flanged Hex Set Screw Zinc Silver 6
5x16 Flanged Hex Set Screw Zinc Silve 6
M5 FLANGE NUT ZINC SILVER 6

 

TECHNICAL SPECIFICATIONS
Operating voltage 3V DC to 15V DC
 Maximum current 7.5A @ 13V
Flow rate (max) 90 L/min (23.8 US gal/min) @ 13V DC
Operating temp. -40° to 120°C (-40° to 248°F)
Pump design

Clockwise centrifugal with volute chamber

Pump weight 900 grams (2.0 lb)
Pump material Nylon 66, 30% glass-filled
Burst pressure 350 kPa (50 psi)
Seal Ceramic face seal

Self Priming

No, none of our pumps are self-priming

Fits hose size

32mm to 51mm (1⅜” to 2”)

 

Accept selected cookies